1. Your Payroll (SG)
  2. Add Ons
  3. NoahFace
  4. Managing NoahFace

Setup and manage access points | Noah Face Web Platform

Pippa Bennet
Updated
Partner Content Team

The Access Points Management feature allows you to create a new access point, complete details such as its name, identifier and site name along with setting up whether you can use it via the iPad app or not. You can also use this feature to edit the details if the need updating, and archive and/or delete an access point you no longer need.

Add an access point
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the   Add Access Point button.
    Source_1.jpg
  4. Complete the following fields:
    • Name.
    • Identifier.
    • Access point type.
    • Sensor identifier.
    • Site.
  5. Click the Add button.
    Source_2.jpg
  6. If you selected the iPad access point type, scan the QR code on your screen with your iPad to connect your web platform with your iPad app.
  7. Click the Ok button.
    Source_3.jpg

Daily activities

Filter displayed access points
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the   Filter button.
    Source_4.jpg
  4. Choose the required filters and then click the Apply button.
    Source_5.jpg
View access point details
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the access point you want to view.
    Source_6.jpg

    Helpful Hint

    You will now you see your access point details on your screen.

    Source_7.jpg

Editing data

Edit access point information
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the   button.
  4. Click the Edit button.
    Source_8.jpg
  5. Make the required changes and click the Update button.
    Source_9.jpg

Data management

Activate an access point
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the   button.
  4. Click the Activate button.
    Source_10.jpg
  5. If you selected the iPad access point type, scan the QR code on your screen with your iPad to connect your web platform with your iPad app.
  6. Click the Ok button.
    Source_11.jpg

Removing data

Deactivate an access point
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the   button.
  4. Click the Deactivate button.
    Source_12.jpg
  5. Click the Ok button.
    Source_13.jpg
Delete an access point
  1. Log into your Noah Face web platform.
  2. Click the Access Points tab.
  3. Click the   button.
  4. Click the Delete button.
    Source_14.jpg
  5. Click the Delete button.
    Source_15.jpg
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.